What is the basic knowledge of aluminum profiles
The aluminium profile titanium plating process used the coating technology. It is a step of adding pre-plating and electroplating processes on the basis of the conventional aluminium extrusion process. The aluminium profile is to chemically treat the activated plated parts in an aqueous solution of salt and hydrochloric acid.
The bath composition of the electroplating process includes nickel sulfate, nickel chloride, boric acid, sodium lauryl sulfate, saccharin, and brightener. The process has the advantages of simplicity, practicability and good effect. The aluminum products made by aluminium section manufacturer obtained by the process has a film hardness of HV ≈1500, and is 150 times more wearable than 22K gold under the same conditions, and they can be processed into various forms of aluminium profile in gold, color and black and other bright colors.
The aluminium profil has a density of only 2.7 g/cm3, which is about 1/3 of the density of steel, copper or brass (7.83 g/cm3, 8.93 g/cm3, respectively). Aluminum exhibits excellent corrosion resistance under most environmental conditions, including air, water (or brine), petrochemicals, and many chemical systems.
Aluminum profiles are often chosen for their excellent electrical conductivity. On the basis of equal weight, the electrical conductivity of aluminum is nearly twice that of copper.
Thermal conductivity rate
The thermal conductivity of structural aluminum is about 50-60% of that of copper, which is advantageous for the manufacture of heat exchangers, evaporators, heating appliances, cooking utensils and cylinder heads and radiators for automobiles by aluminium profile manufacturers.
Aluminum profile extrusions are non-ferromagnetic, which is an important feature for the electrical and electronics industries. Aluminium profile are not self-ignitable, which is important for applications involving handling or contact with flammable and explosive materials.
The machinability of aluminium profile is excellent. In various deformed aluminum alloys and cast aluminum alloys, and in various states after the production of these alloys, the machining characteristics vary considerably, which requires special machine tools or techniques.
The specific tensile strength, yield strength, ductility, and corresponding work hardening rate govern the variation in allowable deformation.
Aluminum extruded products are extremely recyclable, and the properties of recycled aluminum are almost indistinguishable from that of primary aluminum.